How To Get More Results From Your Window Handle Replacement

Choosing the Right Window Handle For Your UPVC Window

The right window handle is vital to a properly fitted uPVC. You'll want a style that's not just functional but also fits the aesthetic of your home.

It is easy to change the uPVC handle. All you need is the following tools and a few minutes of your time.

Metal

The metal window handle can be a decorative touch and an essential piece of hardware to increase security at home. There are a variety of metal window handle options that can be adapted to different frames and materials. Some of these handle designs are specifically designed for sash windows, to make opening and closing the window smoother and less likely to jam. For those looking for a more secure alternative, there are a number of metal locking mechanisms that are designed to stop the window from opening beyond a certain amount.

The most commonly used type of window handle that is used on UPVC is the epag handle. They feature a mental spindle on the back, which is attached to the frame of the window and drives the window mechanism. They can be found on both UPVC and aluminium windows.

Cockspur handles are a different type of window handle, typically found on older UPVC windows. These handles are more difficult than modern Espag handles as they use a traditional peg-locking mechanism.

For a sleeker design There are cam handles available. These handles have a sleek edge and are designed to work with a variety of other kinds of uPVC window. They are perfect for tilt and turn windows in which you can open the window at the bottom, while being able to open the top.

It is essential to take a variety of factors into consideration when choosing new window handles made of steel including the step height as well as the direction in which the handle rotates. The distance between the underside and the bottom of the screw plate is the most important thing to take into consideration. The second one is the direction in which the handle can be rotated. Some handles can only rotate in one direction, such as clockwise. Other handles can only rotate in the opposite direction.

Plastic

There are a variety of window handles made from plastic. They are all designed to operate windows and protect them against unwanted invaders. They are available in a variety of colours and styles to fit uPVC and aluminium windows. Some windows are also designed to include a lock. This adds security, allowing you to keep the window open and safe from intrusion.

Window handle problems can arise in a wide range of circumstances. Sometimes, they may not be able to turn properly. This can happen because dust is able to penetrate the mechanism and blocking it or causing dirt. A common problem is when the window handle begins to move in a tight manner. This is a sign the window handle requires attention.

It is essential to contact an expert when this happens. They can help you resolve the issue quickly and efficiently. They can also give advice on how to replace a plastic handle with one that is more reliable and will perform better.

Most manufacturers will use the exact same fasteners, regardless of the type of handle you're using. It's therefore easy to change the window handle and lock using the exact model.

When you're looking for the ideal replacement handle, you need to know your current window size and design. This will ensure that you buy a handle that is perfect and won't cause any problems with your existing windows. Take note of the spindle size - it's the distance the handle extends from its base. This is a crucial aspect if you intend to utilize your new window handle with a limiter fitted.

Casement

Similar to awning windows, casement windows hinge on the top and bottom, but they open sideways to the left or right rather than opening up vertically. They are also less messy and provide a fantastic view of your yard or garden, as well as allowing fresh air in. They're a popular choice for new construction, and can also be a great addition to the architectural appeal of older homes. Over time, they can become difficult to open or shut due to worn-out hardware or stripped gears. In some cases, a window professional may need to replace the entire crank mechanism.

Casement or awning windows typically come with a roto-gear or crank mechanism that allows the window to be opened and closed but also include an locking mechanism that keeps the sash in place when closed.  upvc replacement door handles  on a casement window works in tandem with the bezel locks on the frame to close the window. However, many people overtighten the handle on the casement window. This can cause the locking mechanism to work against each other which causes the window to not open or shut properly.

It's also common for the window crank handle to get worn out over time. This can occur when the window was closed and opened several times over a long time. This could also happen when the window is being used as a prop when it is open, causing the operating handle to rub on the crank shaft and gears.

Replacing a window with a casement or awning window crank is a simple DIY window repair. It can save you money over the course of time. The first thing you'll need do is locate the trim mounting screws that hold the casement cover in place (Photo 3). After removing the screws, you can take off the old handle and inspect the crank mechanism. Gears can be relubricated but if they are already damaged, you might have to replace them.

Cockspur

Cockspur window handles are found on older uPVC timber, aluminium and timber windows. They are key locking, easy to operate and provide an effective barrier against cold and noise from the outside. The handle opens up by pulling the lever down and the cockspur nose closes over a wedge striker within the frame to seal the window on closing. Replacing both the handle as well as the cockspur wedge strikes can make your double-glazed windows more efficient and improve security.

These handles are available for both left and right-handed windows. They can be operated by turning them 90°. The handles come with a spur that presses up against the PVC wedge of the window frame in order to create a secure closing. They are simple to fit and come in various finishes, including black, white, satin chrome and PVD gold.

It can be a challenge to determine the backset on the cockspur, particularly if you are replacing an old handle. This handle was designed to address the issue. It has three packers of various thicknesses that can be placed on the underside of the handle nose.

The Schlosser Technik Apto is a high-quality replacement cockspur with flexible screw fixing centers. It can be used for a variety of applications between 9mm to 21mm. It is also simple to put in with key locking and is available in a variety of finishes.

This handle can be used to tilt and turn windows, but not side opening casement windows (which have a pivot that is separate from the turn and tilt). It can be used to replace old or damaged handles on uPVC or aluminium frames with rivets rather than screws - the only difference being the method of attachment. You will require the use of a rivet gun as well as rivets to fit this handle to your window frame.

Espagnolette

Espagnolette window handles, also referred to as shootbolts or espagnolette locks are the locking mechanism that connects to the multi-point lock system inside your uPVC windows. They are a typical feature in older homes and provide both aesthetics as well as security for your home. Espagnolette handles are offered with key-locking and non-key-locking mechanisms and come in both crank and inline designs. They can be straight or curved. The key-locking feature adds an extra layer of security, as it prevents the handle from being opened from the outside using a thin screwdriver stuck between the frames. This is a popular burglary technique!

There's a wide selection of espagnolette handles available from at GB DIY Store. Each one has a different spindle length that extends from the back of the handle, so when looking to replace your espag handles, it's vital to measure the current handle's spindle length to ensure that you get the right size replacement handle. After you've completed this, simply browse our range of espag replacement handles to find the perfect style for your windows.

We have a large selection of white uPVC espagnolette handles with key locking and non-key locking options. They are available in a variety of colours and spindle lengths to ensure you can match your new handles to your existing window frame and decor. The espagnolette handle collection includes contemporary and contemporary styles, as also classic designs, and each replacement handle comes with 5 different magnetic spindle lengths between 15mm and 55mm, which means you can easily attach the handle to your window without having to purchase an exact size screw!

A clever rosette on the back of the rose makes sure that the spindle can be used with the left-hand or right-hand lever. This prevents any mishaps. A spindle made of metal is used to secure the espagnolette handle. The handle is held in place by an innovative mechanism called a click-fit that engages by rotating the handle with a hand, making an audible "click".